250W RMS, 500W MAX 2-Ohm Impedance 10 Inch / 250mm Shallow Subwoofer - DMD102SH
Look no further if you are seeking a solution when challenged with space limitations for adding bass to your car audio system. The Diamond DMD shallow series subwoofers measure in with only 3 inches of depth and perform best in sealed enclosures performing just like a conventional full-size subwoofer but taking up less space. For optimum bass response, we recommend using two DMD shallow subwoofers in a narrow 1 cubic foot enclosure. The added surface area provided by the additional subwoofer will more than double the bass output!
True-fiber weave paper backed parabolic cone - NBR half-roll surround optimized for linear travel - Protective ABS ontemporary designed front trim piece - Die cast frame with integral under and over spider venting - Klippel® DA optimized motor and uspension symmetry - Extremely shallow mounting depth of 3 inches
Features:
- 2Ω Impedance
- 250W RMS, 500W MAX
- Dual Voice Coil
- Mounting Diameter: 9.13 “ / 232mm
- Mounting Depth: 3 “ / 76mm
- Grills Included
Diamond Audio - DMD 10" 250W RMS 2-Ohm Impedance Shallow Subwoofer
Subwoofer Size 10'' Nominal Impedance (ohms) 2Ω SPL (db) 86.1 Re (Ω)[series] 3.4 Qms 5.5 Qes 0.55 Qts 0.50 Fs-Free Air Resonance (Hz) 40.0 Vas (Liter) 22.7 Sd (cm²) 0.036 BL (T*M) 14.1 Xmax - Inch(mm) 7.9 Cms (mm/N) 0.12 Mms (g) 128 Pwr (W) NOM/MAX 250/500 Total Diameter 10.87'' (276.0mm) Mounting Diameter (inch/mm) 9.13 “ (232.0mm) Screw Hole Diameter 10.00" (254.0mm) Mounting Depth 3.00'' (76.0mm) Magnet Diameter (E) 5.69" (144.5mm) Grille Included Authorized Internet Dealer for all Diamond Audio Products