300W RMS, 600W MAX 4-Ohm Impedance 12 Inch / 300mm Shallow Subwoofer - DMD124SH
Look no further if you are seeking a solution when challenged with space limitations for adding bass to your car audio system. The Diamond DMD shallow series subwoofers measure in with only 3 inches of depth and perform best in sealed enclosures performing just like a conventional full-size subwoofer but taking up less space. For optimum bass response, we recommend using two DMD shallow subwoofers in a narrow 1 cubic foot enclosure. The added surface area provided by the additional subwoofer will more than double the bass output!
True-fiber weave paper backed parabolic cone - NBR half-roll surround optimized for linear travel - Protective ABS ontemporary designed front trim piece - Die cast frame with integral under and over spider venting - Klippel® DA optimized motor and uspension symmetry - Extremely shallow mounting depth of 3 inches
Features:
- 4Ω Impedance
- 300W RMS, 600W MAX
- Dual Voice Coil
- Mounting Diameter: 11.06 “ / 281mm
- Mounting Depth: 3 “ / 76mm
- Grills Included
SPECIFICATIONS
OWNER'S MANUAL
Diamond Audio - DMD 12" 300W RMS 4-Ohm Impedance Shallow Subwoofer
Subwoofer Size 12" Nominal Impedance (ohms) 4Ω SPL (db) 86.2 Re (Ω)[series] 6.0 Qms 5.0 Qes 0.84 Qts 0.72 Fs-Free Air Resonance (Hz) 38.6 Vas (Liter) 45.5 Sd (cm²) 0.054 BL (T*M) 16.4 Xmax - Inch(mm) 8.8 Cms (mm/N) 0.11 Mms (g) 154 Pwr (W) NOM/MAX 300/600 Total Diameter 12.83'' (326.0mm) Mounting Diameter (inch/mm) 11.06'' (281.0mm) Screw Hole Diameter 11.89" (302.0mm) Mounting Depth 3.00'' (76.0mm) Magnet Diameter (E) 5.69" (144.5mm) Grille Included Authorized Internet Dealer for all Diamond Audio Products